What is the meaning of the A6cf BMW code?
If you tried to connect the OBD scanner with your BMW, it’s quite possible that you saw an A6cf error code.
BMW makes cars to last with powerful components bolstering the capacity of these cars. However, these cars can still malfunction in which case proper error codes are required to inform us where things went wrong.
The computer of the BMW can provide such warnings, with consistency which keeps the car safe for a long period of time.
Cars use fault codes, also referred to as OBD codes, to inform the owner of malfunctions within the car. These can be both software and component-related issues each with its own error code. Error codes themselves are written in a way where they specifically refer to a certain issue to avoid confusion. 
Computers and the contents of a car can fit these simple codes much easier than they can elaborate instructions on the problem. To read the codes in a deeper manner, you can check the manual or read about them online.
Both of these sources being outside of the car means they can speculate and cover more on the causes that make the error codes appear.
BMW computers in cars are pretty good but they still require codes to be displayed. Which is why some codes can be hard to figure out. To help you with some of them, let’s look into A6CF.
A6cf BMW code
The a6cf BMW error code warns that something has gone wrong with the AUC sensor. AUC sensor is a sensor used to detect toxins in the ambient air when A/C is used outside air. It helps keep as much of the less-favorable air out of our car as possible. Though it doesn’t fully cut it out.
Though generally the vehicle will simply recirculate inside air, when we need outside one to come in it’s better that it has no pollutants. Both for our short and long-term health. Driving through a tunnel may be one such example where AUC would kick in.
AUC sensors are installed under the air filter box due to this immediate interaction. Additionally, it will help provide that much-needed fresh air.
However, the BMW cars have had issues with it in the past, which is why a6cf BMW error code is specifically noted. 
How to resolve the code?
It’s possible to address error codes that our car receives. Just about any error will inform us properly on where we should look next with the code alone.
Checking online is bound to discover a least a few specific issues and their fixes that can be employed. For A6CF BMW error codes, some of them include the following.
- Software issues
An issue may not be with the AUC sensor directly but with the software that transmits information between the components.
In this case, a software update is the best way to go. Rather than spending too much time trying to solve an issue that’s not even tied to the physical component. 
- Wear and Tear
After some time, the sensor will simply start to fail. There is little that can be done in this case except a full replacement. The fresh sensor will act in a more reliable and healthy manner while providing us with much better driving conditions.
- Check and fix the wiring
The wiring of a car is directly connected to the function of the AUC sensor and is its connection to the AC. This means both systems will act if the wiring gets damaged.
That’s why the best thing to do is check the wiring if the AUC sensor has been inspected already yet seems to have nothing wrong with it. This type of issue has been reported a number of times, with the a6cf error code still displaying but the AUC sensor itself not being an issue.
- Clean the filter
A simple cleaning session of the filter can be invaluable to the AUC sensor. However, the process of doing so is a bit complicated. It requires a few tools and a proper replacement, which needn’t specifically be the air filter for a car. This does need some guiding so let’s go through it step by step.
How to clean the AUC sensor?
Though your car may differ in shape and some components could be shifted around, the AUC sensor is often near your HVAC systems. Cleaning the filter inside could extend its lifespan and save you money.
First, locate the AUC sensor on top of your fan shroud. Detach and remove the sensor. This can be done by sliding it to the left first. Then pry it upwards and forwards to disengage the clips.
Next, pull on the flap with a flathead to allow the filter to slide out. This will help you access the parts that need to be properly cleaned.
Now use compressed air to lightly remove dust from the inner portion of the sensors. This will keep them as functional as possible, making them detect any pollutants well. Your sensor has been cleaned, it’s time to replace the filter.
If you haven’t purchased a new filter for your AUC sensor, an identical air filter will do. Make sure it fits the specifications for the one used within the AUC sensor. Then, put the filter into the AUC sensor. 
The last step is to slide the AUC sensor back into the tray, tilt and put the right clip onto it first, followed by the left clip. Close it up properly and the AUC sensor and its filter should be as good as new.
Related: Increased Steering Effort BMW
The a6cf BMW error code points to issues with the AUC sensor. This immediate source of knowledge allows us to act on the source of the issue much earlier than most other sources of information would allow.
Though a bit of extra digging may be needed to fully figure out the reason our AUC sensor is malfunctioning, it’s good practice to treat it as soon as possible. With the help of some cleaning tips, you car should be rid of the error code and back at top shape.
Read Next: Driving Stabilisation BMW